A spin crossover FeII4L6 cage based on pyridyl-hydrazone sites.

Reported here is the first FeII based supramolecular cage with pyridyl-hydrazone ligand scaffolds that exhibits temperature induced spin crossover behaviour. Density functional theory calculations were employed to investigate the cause of the occurrence of this phenomenon based on the ligand structure. These results indicate that the reported low-spin cages with pyridyl-imine sites could be reconsidered for spin crossover by carefully manipulating the functional groups in the ligand system.

Accessing Photoredox Transformations with an Iron(III) Photosensitizer and Green Light.

Efficient excited-state electron transfer between an iron(III) photosensitizer and organic electron donors was realized with green light irradiation. This advance was enabled by the use of the previously reported iron photosensitizer, [Fe(phtmeimb)2]+ (phtmeimb = {phenyl[tris(3-methyl-imidazolin-2-ylidene)]borate}, that exhibited long-lived and luminescent ligand-to-metal charge-transfer (LMCT) excited states. A benchmark dehalogenation reaction was investigated with yields that exceed 90% and an enhanced stability relative to the prototypical photosensitizer [Ru(bpy)3]2+. The initial catalytic step is electron transfer from an amine to the photoexcited iron sensitizer, which is shown to occur with a large cage-escape yield. For LMCT excited states, this reductive electron transfer is vectorial and may be a general advantage of Fe(III) photosensitizers. In-depth time-resolved spectroscopic methods, including transient absorption characterization from the ultraviolet to the infrared regions, provided a quantitative description of the catalytic mechanism with associated rate constants and yields.

Functionalized 1,8-Diazaiptycenes as Monomers for Aromatic Oligoamide Foldamers.

Diversification of the structures and the applications possible for foldamers rely on expansion of the building block library available for their synthesis. In this work, we describe the synthesis of a range of three dimensional heteroaromatic monomers, based on iptycene scaffolds, that are suitable for the synthesis of aromatic oligoamide foldamers. These units can be obtained in gram quantities in up to 80 % yield through [4+2] cycloaddition between diester, diamine, and amino acid derivatives of 1,8-diazaanthracenes and a variety of dienophiles. X-ray structural studies of the monomers and an oligomer show that the new motif orients the two heterocyclic rings and attached groups at an angle of approximately 120° to each other, opening new geometric considerations for the design of this class of foldamer.

Correction: Water binding stabilizes stacked conformations of ferrocene containing sheet-like aromatic oligoamides.

Correction for 'Water binding stabilizes stacked conformations of ferrocene containing sheet-like aromatic oligoamides' by Ya-Zhou Liu et al., Org. Biomol. Chem., 2021, DOI: 10.1039/d1ob00580d.

Water binding stabilizes stacked conformations of ferrocene containing sheet-like aromatic oligoamides.

While water clusters play an essential role in the stability of biological structures, their ability to stabilize synthetic oligomers is less understood. We have synthesized a heptameric sheet-like aromatic oligoamide foldamer with ferrocene as turn unit. It shows strong interactions with water in the solid state and in solution. The water binding limits the fluxional processes resulting from the flexible ferrocene unit, highlighting the importance of such interactions for conformational studies on this class of molecule.

Balancing Ligand Flexibility versus Rigidity for the Stepwise Self-Assembly of M12 L24 via M6 L12 Metal-Organic Cages.

Non-covalent interactions are important for directing protein folding across multiple intermediates and can even provide access to multiple stable structures with different properties and functions. Herein, we describe an approach for mimicking this behavior in the self-assembly of metal-organic cages. Two ligands, the bend angles of which are controlled by non-covalent interactions and one ligand lacking the above-mentioned interactions, were synthesized and used for self-assembly with Pd2+ . As these weak interactions are easily broken, the bend angles have a controlled flexibility giving access to M2 (L1)4 , M6 (L2)12 , and M12 (L2)24 cages. By controlling the self-assembly conditions this process can be directed in a stepwise fashion. Additionally, the multiple endohedral hydrogen-bonding sites on the ligand were found to play a role in the binding and discrimination of neutral guests.

Aromatic foldamers as scaffolds for metal second coordination sphere design.

As metalloproteins exemplify, the chemical and physical properties of metal centers depend not only on their first but also on their second coordination sphere. Installing arrays of functional groups around the first coordination sphere of synthetic metal complexes is thus highly desirable, but it remains a challenging objective. Here we introduce a novel approach to produce tailored second coordination spheres. We used bioinspired artificial architectures based on aromatic oligoamide foldamers to construct a rigid, modular and well-defined environment around a metal complex. Specifically, aza-aromatic monomers having a tethered [2Fe-2S] cluster have been synthesized and incorporated in conical helical foldamer sequences. Exploiting the modularity and predictability of aromatic oligoamide structures allowed for the straightforward design of a conical architecture able to sequester the metal complex in a confined environment. Even though no direct metal complex-foldamer interactions were purposely designed in this first generation model, crystallography, NMR and IR spectroscopy concurred to show that the aromatic oligoamide backbone alters the structure and fluxional processes of the metal cluster.

Structure-Dependent Guest Recognition with Flexible Ferrocene-Based Aromatic Oligoamide ß-Sheet Mimics.

A series of aromatic oligoamides incorporating an inherently flexible ferrocene dicarboxylic acid unit was synthesized. Solid state, solution, and computational studies on these systems indicated that the aromatic strands can adopt a syn parallel stacked conformation. This results in modular ß-sheet-like molecular clefts that display structure-dependent recognition of small polar molecules. NMR and theoretical studies of the host-guest interaction support an in cleft binding mode and allowed the selectivity of the oligomers to be rationalized on the basis of minor changes in functional-group presentation on the edge of the aromatic strands.

Increasing the size of an aromatic helical foldamer cavity by strand intercalation.

The postsynthetic modulation of capsules based on helical aromatic oligoamide foldamers would be a powerful approach for controlling their receptor properties without altering the initial monomer sequences. With the goal of developing a method to increase the size of a cavity within a helix, a single-helical foldamer capsule was synthesized with a wide-diameter central segment that was designed to intercalate with a second shorter helical strand. Despite the formation of stable double-helical homodimers (K(dim)>10(7) M(-1)) by the shorter strand, when it was mixed with the single-helical capsule sequence, a cross-hybridized double helix was formed with K(a)>10(5) M(-1). This strategy makes it possible to direct the formation of double-helical heterodimers. On the basis of solution- and solid-state structural data, this intercalation resulted in an increase in the central-cavity size to give a new interior volume of approximately 150 Å(3).

Synthesis of 1,8-diazaanthracenes as building blocks for internally functionalized aromatic oligoamide foldamers.

The synthesis of a variety of 9-functionalized 1,8-diazaanthracene diesters and amino acids is described. Derivatization at the 9-position relies on facile reactions performed on the 9-chloro and 9-bromomethyl precursors. This has allowed the incorporation of nucleophilic or sensitive functional groups that otherwise cannot be incorporated under standard methods for synthesizing these compounds. Additionally, the synthesis of the protected amino acids via a high-yielding monosaponification and subsequent Curtius rearrangement has been accomplished on a multigram scale. These units, together with the functionalized derivatives, should prove to be useful monomers in the synthesis of aromatic oligoamide foldamers.

Hyperfine interactions and electron distribution in Fe(II)Fe (I) and Fe (I)Fe (I) models for the active site of the [FeFe] hydrogenases: Mössbauer spectroscopy studies of low-spin Fe(I.).

Mössbauer studies of [{µ-S(CH2C(CH3)2CH2S}(µ-CO)Fe(II)Fe(I)(PMe3)2(CO)3]PF6 (1 OX ), a model complex for the oxidized state of the [FeFe] hydrogenases, and the parent Fe(I)Fe(I) derivative are reported. The paramagnetic 1 OX is part of a series featuring a dimethylpropanedithiolate bridge, introducing steric hindrance with profound impact on the electronic structure of the diiron complex. Well-resolved spectra of 1 OX allow determination of the magnetic hyperfine couplings for the low-spin distal Fe(I) ([Formula: see text]) site, A x,y,z  = [-24 (6), -12 (2), 20 (2)] MHz, and the detection of significant internal fields (approximately 2.3 T) at the low-spin ferrous site, confirmed by density functional theory (DFT) calculations. Mössbauer spectra of 1 OX show nonequivalent sites and no evidence of delocalization up to 200 K. Insight from the experimental hyperfine tensors of the Fe(I) site is used in correlation with DFT to reveal the spatial distribution of metal orbitals. The Fe-Fe bond in [Fe2{µ-S(CH2C(CH3)2CH2S}(PMe3)2(CO)4] (1) involving two [Formula: see text]-type orbitals is crucial in keeping the structure intact in the presence of strain. On oxidation, the distal iron site is not restricted by the Fe-Fe bond, and thus the more stable isomer results from inversion of the square pyramid, rotating the [Formula: see text] orbital of [Formula: see text]. DFT calculations imply that the Mössbauer properties can be traced to this [Formula: see text] orbital. The structure of the magnetic hyperfine coupling tensor, A, of the low-spin Fe(I) in 1 OX is discussed in the context of the known A tensors for the oxidized states of the [FeFe] hydrogenases.

Structural and spectroscopic features of mixed valent Fe(II)Fe(I) complexes and factors related to the rotated configuration of diiron hydrogenase.

The compounds of this study have yielded to complementary structural, spectroscopic (Mössbauer, EPR/ENDOR, IR), and computational probes that illustrate the fine control of electronic and steric features that are involved in the two structural forms of (µ-SRS)[Fe(CO)2PMe3]2(0,+) complexes. The installation of bridgehead bulk in the -SCH2CR2CH2S- dithiolate (R = Me, Et) model complexes produces 6-membered FeS2C3 cyclohexane-type rings that produce substantial distortions in Fe(I)Fe(I) precursors. Both the innocent (Fc(+)) and the noninnocent or incipient (NO(+)/CO exchange) oxidations result in complexes with inequivalent iron centers in contrast to the Fe(I)Fe(I) derivatives. In the Fe(II)Fe(I) complexes of S = 1/2, there is complete inversion of one square pyramid relative to the other with strong super hyperfine coupling to one PMe3 and weak SHFC to the other. Remarkably, diamagnetic complexes deriving from isoelectronic replacement of CO by NO(+), {(µ-SRS)[Fe(CO)2PMe3] [Fe(CO)(NO)PMe3](+)}, are also rotated and exist in only one isomeric form with the -SCH2CR2CH2S- dithiolates, in contrast to R = H ( Olsen , M. T. ; Bruschi , M. ; De Gioia , L. ; Rauchfuss , T. B. ; Wilson , S. R. J. Am. Chem. Soc. 2008 , 130 , 12021 -12030 ). The results and redox levels determined from the extensive spectroscopic analyses have been corroborated by gas-phase DFT calculations, with the primary spin density either localized on the rotated iron in the case of the S = 1/2 compound, or delocalized over the {Fe(NO)} unit in the S = 0 complex. In the latter case, the nitrosyl has effectively shifted electron density from the Fe(I)Fe(I) bond, repositioning it onto the spin coupled Fe-N-O unit such that steric repulsion is sufficient to induce the rotated structure in the Fe(II)-{Fe(I)((•)NO)}(8) derivatives.

Sulfonated diiron complexes as water-soluble models of the [Fe-Fe]-hydrogenase enzyme active site.

A series of diiron complexes developed as fundamental models of the two-iron subsite in the [FeFe]-hydrogenase enzyme active site show water-solubility by virtue of a sulfonate group incorporated into the -SCH(2)NRCH(2)S- dithiolate unit that bridges two Fe(I)(CO)(2)L moieties. The sulfanilic acid group imparts even greater water solubility in the presence of ß-cyclodextrin, ß-CyD, for which NMR studies suggest aryl-sulfonate inclusion into the cyclodextrin cavity as earlier demonstrated in the X-ray crystal structure of 1Na·2 ß-CyD clathrate, where 1Na = Na(+)(µ-SCH(2)N(C(6)H(4)SO(3)(-))CH(2)S-)[Fe(CO)(3)](2), (Singleton et al., J. Am. Chem. Soc.2010, 132, 8870). Electrochemical analysis of the complexes for potential as electrocatalysts for proton reduction to H(2) finds the presence of ß-CyD to diminish response, possibly reflecting inhibition of structural rearrangements required of the diiron unit for a facile catalytic cycle. Advantages of the aryl sulfonate approach include entry into a variety of water-soluble derivatives from the well-known (µ-SRS)[Fe(CO)(3)](2) parent biomimetic, that are stable in O(2)-free aqueous solutions.

A cyclodextrin host/guest approach to a hydrogenase active site biomimetic cavity.

The hydrophobic cavity of the active site of [FeFe]-Hydrogenase is mimicked by two cyclodextrin molecules which surround a 2Fe2S synthetic analogue of the active site, outfitted with an aryl sulfonate to promote inclusion into beta-cyclodextrin. The X-ray crystal structure of the clathrate shows an increased torsion angle between the apical CO ligands indicating that the supramolecular cage destabilizes the eclipsed geometry typical of diiron model complexes. Inclusion in the model second coordination sphere also has important effects on the electrochemical properties of the model complex including an approximately 80 mV shift of the Fe(I)Fe(I)/Fe(I)Fe(0) reduction and a change in the potential at which electrocatalytic reduction of protons by the diiron complex occurs.

Orientation and stereodynamic paths of planar monodentate ligands in square planar nickel N2S complexes.

The well-established presence of histidine donors in binding sites of Ni-containing biomolecules prompts the study of orientational preference and stereodynamic nature of flat monodentate ligands (L = imidazoles, pyridine and an N-heterocyclic carbene) bound to planar N(2)SNi moieties. Square planar [N(2)SNiL](n+) complexes are accessed through bridge-splitting reactions of dimeric, thiolate-S bridged [N(2)SNi](2) complexes. The solid state molecular structures of three mononuclear products, and three monothiolate bridged dinickel complexes, reveal that the plane of the added monodentate ligand orients largely orthogonal to the N(2)SNiL square plane. Variable temperature (1)H NMR characterization of dynamic processes and ground state isomer ratios of imidazole complexes in their stopped exchange limiting spectra, readily correlate with density functional theory (DFT)-guided interpretation of Ni-L rotational activation barriers. Full DFT characterization finds Ni-L bond lengthening as well as a tetrahedral twist distortion in the transition state, reaching a maximum in the NHC complex, and relating mainly to the steric hindrance derived both from the ligand and the binding pocket. In the case of the imidazole ligands a minor electronic contribution derives from intramolecular electrostatic interactions (imidazole C-2 C-H(delta+)- - S(delta-) interaction). Computational studies find this donor-acceptor interaction is magnified in O-analogues, predicting coplanar arrangements in the ground state of N(2)ON(imid)Ni complexes.

Influence of sulf-oxygenation on CO/L substitution and Fe(CO)3 rotation in thiolate-bridged diiron complexes.

Kinetic studies of CO/L substitution reactions of the well-known organometallic complex (mu-pdt)[Fe(CO)(3)](2) (pdt = 1,3-propanedithiolate), complex 1, and its sulfur-oxygenated derivative (mu-pst)[Fe(CO)(3)](2) (pst = 3-sulfenatopropane-1-thiolate), 1-O, have been carried out with the goal of understanding the influence of the sulfenato ligand on the activation barrier to ligand substitution in such diiron carbonyl complexes which consists of two components: intramolecular structural rearrangement (or fluxionality) and nucleophilic attack by the incoming ligand. The CO/PMe(3) substitution reactions of complex 1 follow associative mechanisms in both the first and the second substitutions; the second substitution is found to have a higher activation barrier for the overall reaction that yields 1-(PMe(3))(2). Despite the increased electrophilicity of the Fe(CO)(3) unit in 1-O versus 1, the former reacts more sluggishly with PMe(3), where practical kinetic measurements are at such high temperatures that CO dissociation parallels the associative path. Kinetic studies have established that in complex 1-O both the first and the second CO/CN(-) substitutions proceed via associative paths with higher E(act) barriers than the analogous reactions with complex 1. Theoretical calculations (density functional theory) have been used in conjunction with variable temperature (13)C NMR spectral studies to examine the energy barriers associated with rotation of the Fe(CO)(3) unit. The activation energy required for rotation is higher in the sulfenato than in the analogous thiolato complexes. Thus, the greater barrier to structural deformation in 1-O inhibits its ability to expand its coordination number as compared to the thiolate, 1, resulting in slower reaction rates of both PMe(3) and CN(-) substitution reactions.

Imidazole-containing (N3S)-Ni(II) complexes relating to nickel containing biomolecules.

Dimeric (N(2)S)Ni complexes and the monomeric N(2)S(2) bismercaptodiazacycloheptane nickel complex, (bme-dach)Ni, serve as precursors to two N(2)-, N'-/ S- complexes where N(2) = diazacycloheptane, N' = imidazole and S = thiolate. As rare examples of nickel complexes containing a mixed thiolate/imidazole ligand set, these complexes are characterized by X-ray diffraction, UV/vis, and variable temperature (1)H NMR spectroscopies, and electrochemistry. Density functional theory computations relate the orientation of the imidazole with respect to the N(2)N'SNi square plane to the VT NMR observed fluxionality and activation parameters. The superoxide dismutase activity of the imidazole complexes was investigated by the nitroblue tetrazolium assay.

Sulfur oxygenates of biomimetics of the diiron subsite of the [FeFe]-hydrogenase active site: properties and oxygen damage repair possibilities.

This study explores the site specificity (sulfur vs the Fe-Fe bond) of oxygenation of diiron (Fe(I)Fe(I) and Fe(II)Fe(II)) organometallics that model the 2-iron subsite in the active site of [FeFe]-hydrogenase: (mu-pdt)[Fe(CO)(2)L][Fe(CO)(2)L'] (L = L' = CO (1); L = PPh(3), L' = CO (2); L = L' = PMe(3) (4)) and (mu-pdt)(mu-H)[Fe(CO)(2)PMe(3)](2) (5). DFT computations find that the Fe-Fe bond in the Fe(I)Fe(I) diiron models is thermodynamically favored to produce the mu-oxo or oxidative addition product, Fe(II)-O-Fe(II); nevertheless, the sulfur-based HOMO-1 accounts for the experimentally observed mono- and bis-O-atom adducts at sulfur, i.e., (mu-pst)[Fe(CO)(2)L][Fe(CO)(2)L'] (pst = -S(CH(2))(3)S(O)-, 1,3-propanesulfenatothiolate; L = L' = CO (1-O); L = PPh(3), L' = CO (2-O); L = L' = PMe(3) (4-O)) and (mu-pds)[Fe(CO)(2)L][Fe(CO)(2)L'] (pds = -(O)S(CH(2))(3)S(O)-, 1,3-propanedisulfenato; L = PPh(3), L' = CO (2-O(2))). The Fe(II)(mu-H)Fe(II) diiron model (5), for which the HOMO is largely of sulfur character, exclusively yields S-oxygenation. The depressing effect of such bridging ligand modification on the dynamic NMR properties arising from rotation of the Fe(CO)(3) correlates with higher barriers to the CO/PMe(3) exchange of (mu-pst)[Fe(CO)(3)](2) as compared to (mu-pdt)[Fe(CO)(3)](2). Five molecular structures are confirmed by X-ray diffraction: 1-O, 2-O, 2-O(2), 4-O, and 6. Deoxygenation with reclamation of the mu-pdt parent complex occurs in a proton/electron-coupled process. The possible biological relevance of oxygenation and deoxygenation studies is discussed.